LOC Precision Flying Model Rocket Kit 3.1" LASERLOC 313 LOC LL313
Back from the depths of LOC/Precision, the LaserLOC has been breaking the sound barrier for 35 years. With some added upgrades including slotted booster and LOC N FIN ring combo! This kit is full dual deploy ready to fly higher than ever!
DESCRIPTION
Complexity: Expert
Full Dual Deployment Ready
Diameter: 3.1″
Height: 72.5"
Weight: 3.3lbs.
Motor Mount: 54mm
Parachute Size: 42″ Ripstop Nylon with 15" Drogue
Shock Cord Type: 2x NW-20 20' 3/8″ Nylon with sewn loops
Electronics Bay Included
Fin Thickness: 1/4″
Ring Thickness: 1/4″ LOC-N Ring
Starter Recovery Blankets x2
Full Decals
Boat Tail
Instructions
Motors:
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
