LOC Precision Flying Model Rocket Kit 3.1" Cyclotron LOC PK-47
Cyclotron 3.10" rocket kit PK-47. Hang with us while we're in revival mode with it! Instructions are old, but still valid.
Polyethylene Enhanced Nose Cone and Reducer
Payload Section
6 X Tube Fins
Nylon Ripstop Parachute
38mm Motor Mount
1/4" Laser Cut Plywood Rings
Rail Guides
Vinyl Decal
Made in the USA
Complexity: Pro Intermediate
Diameter: 3.1" Reduces to 2.15"
Height: xx
Weight: xxlbs
Motors:
G64-7 450'
H100-9 650'
I211-11 2000'
J350-12 3200'
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue), Epoxy
Sandpaper
Masking Tape
Finishing Supplies like:
Sanding Sealer
Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
