LOC Precision Flying Model Rocket Kit 3.1" Cyclotron LOC PK-110
4" Cyclotron tube fin rocket! Tube fins make this a super a straight up! Tube fin rockets are rarely affected by wind and don't receive the weathercock like typical rockets with normal fins. Recovery is a newly designed 42″ ripstop nylon parachute with central spill hole making decent as straight as your ascent. Packed with features including rail guides, motor retention, vinyl decals and more! Standing 67″ tall, 54mm mount makes this a great flyer and great candidate for certification flights. A bit of a different, but easy build from the norm. If you like fillets......here you go!
Polyethylene Enhanced Nose Cone and Reducer
Payload Section
6 X Tube Fins
42" Nylon Ripstop Parachute Recovery
54mm Motor Mounts
1/4" Laser Cut Plywood Rings
Includes Vinyl Decal
Made in the USA
Complexity: Intermediate
Diameter: 4.0" Reduces to 3.1"
Height: 67″
Weight: 3.5lbs
Instructions: Yes - Same as 3" Version
Motors:
G80-4 600'
H123-5 1000'
I115-7 1800'
J90-6 3100'
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue), Epoxy
Sandpaper
Masking Tape
Finishing Supplies like:
Sanding Sealer
Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
