LOC Precision Flying Model Rocket Kit 1.63" LaserLOC  LOC-LL163

LOC Precision Flying Model Rocket Kit 1.63" LaserLOC LOC-LL163

(No reviews yet) Write a Review
Now: $63.99
Was: $65.99
Ships same or next day
Calculated at Checkout
Skill Level:
Motor Mount Size:

LOC Precision Flying Model Rocket Kit 1.63" LaserLOC  LOC-LL163

Celebrating 35 years of LOC – we bring back an old favorite! The LaserLOC series was one of the first production minimum diameter kits available to the public. Keeping the tradition going we have a few modern day tweaks that will put your skills to the test. A gentle laser etch around the slots allow for easier glassine removal. Multi-slot airframe allow the fins to click into the booster. Precut 4oz fiberglass cloth can be easily epoxied from fin-airframe-fin. This reinforcement will give your LaserLOC the strength for today’s higher impulse motors. Fiberglass should be applied with a long cure epoxy for best results. If you have never glassed anything before, here’s your chance! The booster is a zipperless design. 1/4″ Launch lugs included. Fly away rail guides are another alternative.

Strong enough for supersonic flights. Light enough on your wallet and to fly an E motor!!!


Using a high build primer apply 2-3 coats. sand with 400 until spirals are filled. Paint as desired or follow below

Createx Paint:

To achieve OEM color(s) the following paint was used and their respective ratios

6002                    Sealer Black
4258                    Gloss Black
4004                    Quick Silver. 1 lite coat, 2 moderate coats (do not over coat!)
4030/4661           Balancing Clear and Candy Emerald (until desired density)

Lightly sand with 1000 grit to knock down any over spray before applying decals

Clear coat as desired after decal application

Skill Level: 3 Pro


Complexity: Expert
Diameter: 1.6″
Height: 42.5
Weight: 13oz.
Motor Mount: 38mm minimum diameter – MMA-2 29mm adaptor included
Parachute Size: 21″ Ripstop Nylon
Shock Cord Type: TN-316-12 12′ 3/16″ Tubular Nylon with sewn loops
Shock Cord Mount: SCM-3
Fin Thickness: 1/8″
Ring Thickness: none-minimum diameter
Starter Recovery Blanket
Full Decal Set
Precision cut Fiberglass fin can reinforcement cloth

LaserLOC163 Rocksim

Laser LOC 163 Instructions

Recommended Engines:

38mm with 29mm adapter

F79-6 1000'

G80-12  3300'

H73-14  4000'

H100-14  5400'


Model Rocket Kits are rated by Skill Level

1 Beginner

2 Intermediate

3 Advanced

4 Expert

5 Master

If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife


Wood Glue, Model Cement or CA(Super Glue)


Masking Tape

Finishing Supplies like:

Wood Filler



Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code