Product Description
ASP Flying Model Rocket Kit Thermal Seeker 18 Parachute ASP KTSP-18
This kit features a lightweight vac-form plastic cone, quality spiral-wound body tube, shock cord made of DuPont KEVLAR® & thin G10 fiberglass fins. Each kit comes with one of our "Hang Time" Competition Parachute kits made of thin 1/4 mil aluminized Mylar®. The parachute size included with each kit is a good all - around size for the model size, but you may want to use a larger or smaller size depending on flying conditions. To see other competition parachute sizes that are available click here.
Length: 13.88"(35.3cm)
Diameter: 0.736"(1.87cm)
Weight: 0.37oz(10.5g)
Parachute Recovery 18" Mylar
Skill Level: 2 Intermediate
Recommended Engines: 1/2A6-2; A3-6; A8-3; A8-5; B4-6; B6-6; C6-7; C12-8; D16-8
What you'll need to build this model:
Adhesives – thin viscosity cyanoacrylate(CA) glue, hobby knife with a sharp #11 blade, sandpaper (medium - 220 or 280, fine - 320 or 400, & [optionally] extra fine - 500 or 600), pencil.
Recommended, but not required: sanding block, extender tip for cyanoacrylate glue, accelerator for cyanoacrylate glue.
What else you'll need to fly this rocket:
Engines (see list above); Recovery Wadding; Electronic Launch System and Launch Pad
Made in the USA
