ASP Flying Model Rocket Kit Thermal Seeker 13 Parachute  ASP KTSP-13

ASP Flying Model Rocket Kit Thermal Seeker 13 Parachute ASP KTSP-13

(No reviews yet) Write a Review
Calculated at Checkout
Skill Level:
1 Beginner
Motor Mount Size:

ASP Flying Model Rocket Kit Thermal Seeker 13 Parachute  ASP KTSP-13

This kit features a lightweight vac-form plastic cone, quality spiral-wound body tube, shock cord made of DuPont KEVLAR® & thin G10 fiberglass fins. Each kit comes with one of our "Hang Time" Competition Parachute kits made of thin 1/4 mil aluminized Mylar®. The parachute size included with each kit is a good all - around size for the model size, but you may want  to use a larger or smaller size depending on flying conditions. To see other competition parachute sizes that are available click here.

Length: 10.2"(25.9cm)    
Diameter: 0.541"(1.374cm)
Weight: 0.25oz(7g)

Parachute Recovery 15" Mylar  
Skill Level: Beginner
Recommended Engines: 1/4A3-3T; 1/2A3-2T; 1/2A3-4T; A3-4T

What you'll need to build this model:
Adhesives – thin viscosity cyanoacrylate(CA) glue, hobby knife with a sharp #11 blade, sandpaper (medium - 220 or 280, fine - 320 or 400, & [optionally] extra fine - 500 or 600), pencil.
Recommended, but not required: sanding block, extender tip for cyanoacrylate glue, accelerator for cyanoacrylate glue.
What else you'll need to fly this rocket:
Engines (see list above); Recovery Wadding; Electronic Launch System and Launch Pad

Made in the USA


Customers Also Viewed

Popular Trending Products