Rocketarium Flying Model Rocket Kit Exocet MM38 RK-1045
The Exocet MM38 is a French-built sea-launched anti-ship missile This kit includes plastic tail cone with the cluster motor mount. The motors are tilted at an angle for exciting flights
Cluster Rocket with Tilted Motors for an Exciting Flight
3D-Printed Tail Cone with Fins
Uses 2 B or C Estes 18mm Motors
Ejection Baffle(no wadding required)
Pre-Cut Fins
3D-Printed Nose Cone
Plastic Parachute.
27" Tall
Intermediate Assembly Skills Required
Recommended Engines(apogee ft):
2 x B6-2 (230'), 2 x C6-5 (620')
Specifications
Length: 27"(68.5cm)
Diameter: 1.64"(42mm)
Estimated Weight without motors: 160g
Challenges
Fins need to be sanded. Otherwise it is not a difficult model to build
This is a cluster rocket and requires specialized launch equipment and/or igniters to launch
Requires
Assembly Skill Levels
Motor, Igniter to Fly
Launch System
3/16" Launch Rod
Wood Glue
Sand Paper
Hobby Knife
Masking Tape(optional)
Primer & Paint
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
