LOC Precision Flying Model Rocket Kit 2.63" AMRAAM AIM-120C -54C LOC YAIM120C256
One of the ISP PERFORMANCE SERIES of kits, which feature factory pre-slotted airframe and through-the-wall fin construction and high power motor capabilities, The AIM-120C is a light weight, high power performer. The 38mm motor mount is great for Level 1 motors if your field can handle it. This kit flies great on a variety of F and G motors using the optional MMA-2 motor mount adapter. Parachute Recovery.
ALL LOC Precision kits include laser cut fins, rings, and slotted airframes. The AMRAAM features: 30″ Booster Section, 15″ Payload, 28″ Ripstop Nylon Parachute, 38mm Motor Tube, Fire Resistant Blanket, Kevlar Shock Cord mount with nylon webbing shock cord, rail buttons and vinyl decals.
Polyethylene Enhanced Nose Cone
Nylon Parachute Recovery
Starter Recovery Blanket
2.6" Slotted Airframe
38mm Motor Mounts
Laser Cut Rings and Fins
Made in the USA
Motor Mount: 38MM (Advanced Series)
Parachute Size: 24″ Ripstop Nylon (Advanced Series)
Shock Cord Type: 9′ 3/16″ Tubular Nylon (Advanced Series)
Shock Cord Mount: SCM-1 Kevlar
Fin Thickness: 1/8″
Ring Thickness: 1/8″ (Advanced Series)
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Wood Glue, Model Cement or CA(Super Glue)
Finishing Supplies like:
Launching Equipment and Supplies like:
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code