null
LOC Precision Flying Model Rocket Kit 4" AIM-54C Phoenix  LOC LCPHX4  Special Order

LOC Precision Flying Model Rocket Kit 4" AIM-54C Phoenix LOC LCPHX4 Special Order

(No reviews yet) Write a Review
Now: $125.99
Was: $130.99
SKU:
LOC LCPHX4
Availability:
Special Order Shipped Direct From LOC please allow extra time for delivery
Shipping:
Calculated at Checkout
Skill Level:
Pro
Motor Mount Size:
54mm
Certification Required:
Level 1 or 2

LOC Precision Flying Model Rocket Kit 4" AIM-54C Phoenix LOC LCPHX4  Special Order

LOC 4" Phoenix - At 42.5″ tall, all the custom laser cut components are included in the box to build it strong and legit! Featuring factory pre-slotted airframe, through-the-wall fin construction and high power motor capabilities. The Phoenix is a fantastic jump into high power.  This version sports a 38mm motor mount and will accept 29mm adapters (sold separately). Multi-Slot fins, decals, rail guides and recovery are standard. Flies on G-H-I motors. *using larger motors MAY require the addition of nose weight! ALWAYS sim your specific build before flight!

Polyethylene Enhanced Nose Cone

Nylon Parachute Recovery 36"

4" Preslotted Air Frame

38mm Motor Mount

Laser Cut Rings and Fins

Rail Guides

Complexity: Intermediate

Diameter: 4″
Height: 42.5"
Weight: 3lbs
Shock Cord Type: NW-15 15' 3/8″ Nylon with sewn loops
Shock Cord Mount: SCM-3 Eyebolt
Fin Thickness: 1/8″
Ring Thickness: 1/8″ x3 - 1/4" FWD x1
Instructions
Decals Included - see pic for details - not all decals shown on the model are included

4" Phoenix Instructions

4" Phoenix Rocksim

Skill Level 5 Pro - Intermediate

A Level 1 or 2 certification is required to fly this model due to weight and/or motor size

Recommended Engines:

38mm H,I: H123-8(1450'), I211-10(3100')

29mm G,H (with Adapter): G80-7(1000'), H128-7(1150')

Maximum apogee 4800ft

 

Model Rocket Kits are rated by Skill Level

1 Beginner

2 Intermediate

3 Advanced

4 Expert

5 Master

Pro - High Power Rocketry

If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife

Ruler

Wood Glue, Model Cement or CA(Super Glue)

Sandpaper

Masking Tape

Finishing Supplies like:

Wood Filler

Sealer/Primer

Paint

Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code