LOC Precision Flying Model Rocket Kit 2.63" AMRAAM AIM-120C  LOC YAIM120C256

LOC Precision Flying Model Rocket Kit 2.63" AMRAAM AIM-120C LOC YAIM120C256

(No reviews yet) Write a Review
Ships same or next day
Calculated at Checkout
Skill Level:
Motor Mount Size:

LOC Precision Flying Model Rocket Kit 2.63" AMRAAM AIM-120C  LOC YAIM120C256

One of the ISP PERFORMANCE SERIES of kits, which feature factory pre-slotted airframe and through-the-wall fin construction and high power motor capabilities, The AIM-120C is a light weight, high power performer. The 38mm motor mount is great for Level 1 motors if your field can handle it. This kit flies great on a variety of F and G motors using the optional MMA-2 motor mount adapter. Parachute Recovery.

ALL LOC Precision kits include laser cut fins, rings, and slotted airframes. The AMRAAM features: 30″ Booster Section, 15″ Payload, 28″ Ripstop Nylon Parachute, 38mm Motor Tube, Fire Resistant Blanket, Kevlar Shock Cord mount with nylon webbing shock cord, rail buttons and vinyl decals.

Polyethylene Enhanced Nose Cone

Nylon Parachute Recovery

Starter Recovery Blanket

2.6" Slotted Airframe

Payload Section

Baffle System

Vinyl Decals

38mm Motor Mounts

Laser Cut Rings and Fins

Launch Lug

Vinyl Decal

Made in the USA

Complexity: Intermediate
Diameter: 2.6″
Height: 54″
Motor Mount: 38MM (Advanced Series) 
Parachute Size: 24″ Ripstop Nylon (Advanced Series)
Shock Cord Type: 9′ 3/16″ Tubular Nylon (Advanced Series) 
Shock Cord Mount: SCM-1 Kevlar
Fin Thickness: 1/8″
Ring Thickness: 1/8″ (Advanced Series)

AMRAAM Instructions


Vinyl Decal


F-50-7  650'

G-80-8  1700'

H-123-10  2650'

I-195-13  5300'


If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife


Wood Glue, Model Cement or CA(Super Glue)


Masking Tape

Finishing Supplies like:

Wood Filler



Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code