LOC Precision Flying Model Rocket Kit 2.6" T-LOC LOC PK-107
T-LOC is a slightly different take on a 3 fin/cone rocket. Adding outside stabilizer makes this a super straight shot! Recovery is an 18″ ripstop nylon parachute with central spill hole making decent as straight as your ascent. Includes a fire blanket to protect your recovery gear, Kevlar shock cord mount and decals. Standing 24″ tall and with a 29mm motor the 2.6″ T-LOC is a great flyer for black powder or composite motors.
Assembly Required Skill Level Pro
Diameter: 2.63″
Length: 24″
Weight: 10 oz
Motor Mount: 29mm
Shock Cord Type: 3/16″ Tubular Nylon with sewn loops
Shock Cord Mount: Eye Bolt SCM1
Fin Thickness: 1/8″
Ring Thickness: 1/8″
Decal Included
Motors E, F, G flies 400 to 2500 feet
E16-4(400'), E23-5(600'), F67-9(1350'), G40-10(2400')
18" Rip Stop Nylon Parachute
1/4" Launch Lug
NO Motor Retention
Fire Blanket
Slotted Airframe
Laser Cut Plywood fins and rings
Logo Decal Only
PK-107TLOC Instructions
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
