LOC Precision Flying Model Rocket Kit 2.63" AGM-84 Harpoon  LOC TWT-HARP26

LOC Precision Flying Model Rocket Kit 2.63" AGM-84 Harpoon LOC TWT-HARP26

(No reviews yet) Write a Review
Now: $84.99
Was: $86.99
Ships same or next day
Calculated at Checkout
Skill Level:
Motor Mount Size:

LOC Precision Flying Model Rocket Kit 2.63" AGM-84 Harpoon LOC TWT-HARP26

LOC AGM-84 SLAM HARPOON Includes pre-slotted airframe, laser cut fins and rings, 28″ rip-stop nylon parachute and swivel, kevlar shock cord mount, elastic shock cord, fire protection blanket, recovery swivel, 1/4″ launch lugs, AND vinyl decal set.

2.6″ variation of an AGM-84 Harpoon missile. Sporting the new Modular Motor Can for the widest variety of motor configurations.  Stock with 1x 29mm motor tubes (D-G) it can easily be switched out for any of the available combinations:


Using removable rivets you can switch out the configuration at any time!  AND the cans are cross compatible with any other 2.6″ MMC style kits!

Polyethylene Enhanced Nose Cone

Nylon Parachute Recovery

Payload Section with Electronics Bay

2.6" Slotted Airframe

Laser Cut Rings and Fins

Rail Guides and Launch Lug

Vinyl Decal

Made in the USA

Complexity: 29mm Intermediate
Diameter: 2.6″
Height: 39.5″
Weight: 15oz
Motor Mount: 29MM (Advanced Series) or 38MM (Performance Series)
Parachute Size: 24″ Ripstop Nylon (Advanced Series) 28″ Parachute (Performance Series)
Shock Cord Type: 9′ 3/16″ Tubular Nylon (Advanced Series) 12′ (Performance Series)
Shock Cord Mount: SCM-1 Kevlar
Fin Thickness: 1/8″
Ring Thickness: 1/8″ (Advanced Series)


TWT-HARP26 Rocksim

Vinyl Decal: Yes


F27-8R  910'

F20-7  1260'

D15-4  230'

E23-5T  530'

E28-4T  715'

E15-4W  720'

F12-5J  775'

F24-7  885'

2x D16-4  350'

2x D13-7W  690'

3x D12-7  900'

4x C6-5  470'

4x C12-6  670'

4x D16-8  950'


If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife


Wood Glue, Model Cement, CA(Super Glue), Epoxy


Masking Tape

Finishing Supplies like:

Wood Filler



Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code