Estes Flying Model Rocket Kit Multi-Roc  EST 1329

Estes Flying Model Rocket Kit Multi-Roc EST 1329

(1 review) Write a Review
EST 1329
Ships same or next day
Calculated at Checkout
Skill Level:
4 Expert
Motor Mount Size:
18mm, 18mm

Estes Flying Model Rocket Kit Multi-Roc  EST 1329  Out of Production

The Estes Multi-Roc is a two stage rocket that also features a glider recovery! PLUS you can launch it IN 6 different configurations!

Hmmm, do you want to fly a single-stage, payloader, dual-stage, maybe even release a glider at apogee? The Multi-Roc is a booster rocket that lets you do it all! This parts-packed kit has everything you need to fly six different ways, and the all-balsa parasite glider is included too! Fly to 1200 feet as a multistage rocket, or stay closer to Earth with a single stage launch. Plug in the payload section, boost the glider to altitude, no rocket gives you so many options for high-flying fun!

Skill Level 4 Expert

Length: 25 in. (36.5 cm)
Diameter: 0.98 in. (25 mm)
Estimated Weight: 2.6 oz. (73.7 g)

Laser Cut Wood Fins

Waterslide Decals

Dual Streamer and Tumble Recovery

1/8" Launch Lug


Estimated Assembly Time 4 Hours (glue drying and painting time not included)


Recommended Engines: 3 Stage Launches--1st Stage: C11-0, D12-0. 2nd Stage: B6-0, C6-0. Rocket: B6-6, C6-7. 2 Stage Launches using 2nd and 3rd Stages--2nd Stage: C6-0. Rocket: B4-4, B6-4, C6-5. Rocket Only: B4-4, B6-4, C6-5.

Projected Max Altitude: 1200 ft. (366 m)


Model Rocket Kits are rated by Skill Level

1 Beginner

2 Intermediate

3 Advanced

4 Expert

5 Master

If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife


Wood Glue, Model Cement or CA(Super Glue)


Masking Tape

Finishing Supplies like:

Wood Filler



Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code


Full one year warranty through manufacturer
  • 4

    Posted by Jonathan Superman Charbonneau, NAR life member 52871 on 6th May 2019

    I have noticed that there isn't any line clip in the kit. Nor is there a base to the nose cone. These parts are essential for switching the payload section in and out.

Customers Also Viewed

Popular Trending Products