Wildman Rocketry Flying Model Rocket Kit 2.2" Punisher SS(38mm) Fiberglass WIM 224
The Punisher SS (Super Sport) is the big brother to the Punisher Sport. Unlike the regular Sport kit, the Punisher SS has a 38mm motor mount and features our new filament wound nosecone. Wildman Head End Deployment is included!
22" of 54mm lightweight Airframe
38mm fiberglass motor mount
5-1 filament wound aluminum tipped nose cone
2 G10 centering rings
1/16" thick G10 fins
CNC machined stepped bulk plates for the avbay
Vent band
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
6 Pro - Professional Mid/High Power
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html
