LOC Precision Flying Model Rocket Kit 4.0" Expediter PK-72ND
The Expediter Rocket Building Kit is one of the ISP PERFORMANCE SERIES of kits, which feature factory pre-slotted airframe and through-the-wall fin construction and high power motor capabilities, the EXPEDITER offers sleek styling due to the use of LOC’s exclusive airframe reducer. The 54mm motor mount is great for low thrusting 54mm motors like the J90 or I65. This model missile is a great Level 1 kit that flies on a variety of H and I motors. It is a very cool looking, versatile rocket.
Complexity: Intermediate
Diameter: 4″
Height: 61.75
Weight: 2.75lbs.
Motor Mount: 54mm with MR-1 Retention
Parachute Size: 36″ Ripstop Nylon
Shock Cord Type: NW-15 15′ 3/8″ Nylon with sewn loops
Shock Cord Mount: SCM-3 Eyebolt
Fin Thickness: 1/8″
Ring Thickness: 1/4″
Instructions: Yes
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
-
Nice kit. Went together well.
Nice kit. Went together well. Kit was missing recovery harness. Erockets modified a box that wasn't long enough for shipping container and didn't use any packing material. The result was damage to the body tube.
