LOC Precision Flying Model Rocket Kit 3.1" 29SS LOC PK-36ND
The 4-29SS is an experimenter’s dream come true. Its unique, removable fin assembly construction was originally designed to fit into the overhead compartment of most commercial aircraft (although times have changed and this may be difficult to do today!) The 4-29SS is a unique 4x29mm motor cluster whose fins attach into the valleys of the motor mount tubes which extend beyond the main airframe. It can take to the skies on 2-G or 4-F motor combinations to altitudes over 2000 ft. and stands over 5′ tall. Parachute Recovery!
Assembly Required Skill Level Pro Advanced
Heavy Duty Body Tube
Diameter: 3.1″
Length: 61.5"
Weight: 29oz
Rail Guides for 10/10 Rail
Precision Laser Cut 1/8" Plywood Fins
Laser Cut 1/8" Plywood Rings
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
Pro Professional
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
