LOC Precision Flying Model Rocket Kit 2.26" Starburst 2x24mm motor LOC PK-28
The Starburst is one of LOC's oldest designs, appearing in catalogs back to 1986. Refreshed for LOC40, this unique 2 x 24mm motor cluster kit now sports our Modular Motor Can, allowing you to switch out the motor can on the fly for ultimate flexibility! Let's cluster again and start with a Starburst!
The Technical:
Complexity: Intermediate
Diameter: 2.6″
Height: 49”
Weight 16oz.
Motor Mount: 2x24mm MMC
Parachute Size: 24″ Ripstop Nylon
Shock Cord Type: TN-316-12’ of Tubular Nylon with sewn loops
Fin Thickness: 1/8″
Ring Thickness: 1/8″
1010 Rail Buttons
Decals: Logo only
Assembly Required Skill Level 3 Advanced
PK-28-STARBURST-MMC-Instructions
Recommended Engines:
See simulations
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
