Estes Flying Model Rocket Kit Boxes Pro Blue Origin New Glenn EST 9735
Command the launch field with the Pro Series II™ Blue Origin New Glenn, an expert level model rocket built for rocketeers who want scale, power, and presence in one unforgettable flight experience.
Standing 38.1 inches tall in 1:100 scale, this massive 29 mm rocket reaches projected altitudes of up to 500 feet on the recommended F15-4 engine, then returns under a 30 inch parachute for controlled recovery and repeatable, confidence inspiring flights.
- SKILL LEVEL: Expert
- SCALE: 1:100
- RECOMMENDED ENGINES: F15-4
- PROJECTED ALTITUDE: 500 ft. (152 m)
The Pro Series II™ Blue Origin New Glenn is a true flagship rocket, designed for experienced builders who want a model that feels as serious as it looks. Its large diameter airframe and substantial finished weight create a sense of authority on the pad and anticipation throughout the countdown.
This expert level kit delivers a deeply rewarding build experience. Laser cut plywood fins provide strength and precision, while the large scale airframe demands careful alignment and craftsmanship, resulting in a finished rocket that feels solid, balanced, and purpose built for mid power flight.
Expert Level Construction That Delivers Confidence
Every component of the New Glenn is designed to support powerful, stable launches. The rigid fin structure and durable airframe work together to create a rocket that inspires confidence from ignition through recovery.
This is a build that rewards patience and attention to detail with a model that performs with authority and looks impressive both in hand and on the launch rail.
Large Scale Presence That Commands Attention
At 1:100 scale and standing over 38 inches tall, the Pro Series II™ Blue Origin New Glenn immediately separates itself from the rest of the flight line. Its height, wide diameter airframe, and substantial mass make it impossible to ignore.
This large scale design amplifies every phase of flight, from the roar of liftoff to parachute deployment high above the field. Whether viewed up close during prep or soaring overhead, this rocket delivers the visual impact expected from a true centerpiece build.
29 mm Power and High Impact Launches
Designed for 29 mm engines, the New Glenn delivers strong, dramatic liftoffs that match its commanding scale. On the recommended F15-4 engine, it climbs smoothly and confidently to projected altitudes of up to 500 feet.
The result is a flight profile that combines power, stability, and visibility, turning every launch into a moment that draws eyes upward and keeps spectators engaged.
Reliable Parachute Recovery for Repeat Flights
After burnout and deployment, the New Glenn descends under a large 30 inch parachute for controlled, dependable recovery. This system helps protect the rocket during landing and supports repeated flights over time.
The end result is a rocket built not just to impress once, but to fly again and again, earning its place as a long term highlight of any Pro Series II collection.
Length - 38.1"(96.9cm)
Diameter - 2.76"(70mm)
Estimated Weight - 15oz(425.2g)
Projected Max Altitude - 500'(152m)
30" Nylon Parachute Recovery
1/4" Launch Lug
Skill Level 4 Expert
Laser Cut Plywood
Plastic Nose Cone
Pencil, Fine Sandpaper, Ruler, Hobby Knife, Scissors, Masking Tape, Clear Tape, Yellow Glue, CA Glue, Epoxy, Spray Adhesive, White Primer, Paint, Clear Coat
Recommended Engines:
Estes: F15-4(caution, very slow off the pad)
Aerotech: E24-4C, F20-4W, F50-6T, F67-6W, G38-7FJ, G77-7R, G40-7W, G78-7G
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
