ASP Flying Model Rocket Kit Two High! ASP KTH-18
Easy to build 2-stage kit! Laser-Cut balsa fins and plastic nose cone. Can be built with either 3 or 4 fins per stage. Fun, high flyer! Great model to learn basic rocketry modeling and staging.
Ideal if you're following the NAR NARTREK program!
Specifications:
Length: 18.75"(47.63mm)
Diameter: 0.736"(18.69mm)
Approx. Weight: 0.92oz(26gm)
Recovery Device: Streamer
Skill Level: Beginner/Intermediate
Recommended Engines:
Single Stage Flights: 1/2A6-2; A8-3; B6-4; C6-5; C6-7
Two Stage Flights: Booster Engines: B6-0; C6-0; Upper Stage Engines: A8-5; B6-6; C6-7
What you'll need to build this model:
Required: Adhesive (A wood glue, such as Elmer's Carpenters Glue, eBond or Titebond can be used for all steps and is recommended); sandpaper (medium - 220 or 280, fine - 320 or 400, & [optionally] extra fine - 500 or 600); pencil or ball point pen; scissors; cotton swab (“Q-Tip”, or piece of scrap balsa wood); hobby knife; scotch tape; sanding sealer (or balsa fillercoat); thinner (appropriate type for the sanding sealer); small paint brush; paint (Spray paint, such as Krylon, Pactra or Tamiya is recommended. Be sure not to mix different types or brands of paint without testing.) - primer (optional), colors as desired & clear (optional).
Optional: filler material (such as Elmer’s Fill & Finish, Elmer’s Professional Carpenter’s Wood Filler or interior spackling paste); sanding block; tack cloth.
What you'll need to fly this model:
Electronic launch system; launch pad with 1/8" launch rod; recovery wadding; engines (see list of recommended engines above).
Made in the USA