Semroc Flying Model Rocket Kit Omega™ KV-64
Skill Level 2
1970 Classic Retro Reproduction with
Simulated Cineroc Payload
Through-the-Wall Fin Construction
Precision-Turned Balsa Nose Cone
Laser-Cut Balsa Fins
Colorful Water Slide Decals
Body Diameter 1.84" (4.7cm)
Length 27.8" (70.6cm)
Fin Span 7.2" (18.3cm)
Net Weight 3.2oz (90.8g)
Made in the USA
Engines Approx. Altitude
C11-0, C11.5 950'
D12-0, D12-5 1650'
D12-0, E9-6 2200'
Model Rocket Kits are rated by Skill Level
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Wood Glue, Model Cement or CA(Super Glue)
Finishing Supplies like:
Launching Equipment and Supplies like:
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
I have owned the original Estes Omega. This kit is much better. The through the wall fin mounting makes fin alignment easier. I also like the fact that it can be flown on E engines as well. I believe it should be rated skill level 4 because one must have prior experience flying single stage "E" and two stage regular to have any chance of successfully flying and recovering a rocket with staged "E" engines.