Semroc Flying model Rocket Kit Hopper™ SEM-KA-36
Leaps off the pad!
Assembly Required Skill Level 2 Intermediate
3D Printed Nose Cone in Tough Resin for detail
Laser Cut 1/8" Lite Plywood Fins
24mm Motor Powered
Googly Eyes
Soft Ears
Colorful Waterslide Decals
15" Parachute Recovery
Body Diameter 1.8"(6.7cm)
Length 12.375"(31.43cm)
Net Weight 3.5oz(99g)
Made in the USA
Engines Approximate Altitude
C11-5 367’ (112m)
D12-5 777’ (237m)
E30-7T 1377’(420m)
F44-8W 1578’(481m)
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
Pro Mid to High Power Rockets
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Sanding Sealer
Primer
Paint
Launching Equipment and Supplies like:
Recovery Wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
