LOC Precision Flying Model Rocket Kit 5.5" Wolverine LOC PK-120 Available by Special Order
The Wolverine is one of the oldest LOC/Precision kits and we’re bringing it back to life with some modern upgrades! While the original version used a short cone and 38mm mount. We thought that the longer cone and a 54MMT would serve better today! With LOC-n-fin style construction, fire blanket and motor retention all included, this is an excellent kit for level 1 or level 2 certification! H-K impulse – the 4″ series of LOC-N-Ring Adaptors will bolt right up for 38mm and 29mm flights!
Polyethylene Enhanced Nose Cone
Nylon Parachute Recovery
5.5" Slotted Airframe
54mm Motor Mounts
Laser Cut Rings and Fins
Parachute fire blanket
Motor retention hardware
Made in the USA
Complexity: Entry Level
Diameter: 5.5″
Height: 55″
Weight: 5.25lbs.
Motor Mount: 54mm
Parachute Size: 50″ Ripstop Nylon **Colors are random**
Shock Cord Type: NW-20 20′ 3/8″ Nylon with sewn loops
Shock Cord Mount: SCM-3
MR-1 motor retention
10 series rail guides
recovery blanket
Fin Thickness: 1/4″
Ring Thickness: 1/4″
Instructions: Yes
Decals: Yes
Motors:
H232 930'
I161 1500'
J180 4200'
K550 6900'
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
