LOC Precision Flying Model Rocket Kit 4" EZI-65 LOC PK-64
The EZI-65 Rocket Kit is one of the ISP PERFORMANCE SERIES of kits, which feature factory pre-slotted airframe and through-the-wall fin construction and high power motor capabilities, the EZI-65 is a light weight, high power performer. The 54mm motor mount is great for Level 1 motors. Designed for the Aerotech I-65 motor when it first came out, this kit will also fly on the Aerotech J-90 motor for a cool Level 2 attempt – try one out if your field can handle it. It is a very cool flight! (and sometimes a long walk) This kit flies great on a variety of G , H and I motors using the optional MMA-3 (for 29mm motors) or MMA-4 (for 38mm motors) motor mount adapter. Parachute Recovery.
Polyethylene Enhanced Nose Cone
36" Rip Stop Nylon Parachute
Payload Section
4" Slotted Airframe
54mm Motor Mount with Z-Clip Retention
Laser Cut Rings and Fins
Vinyl Decal
Made in the USA
Complexity: Entry-Intermediate
Diameter: 4″
Height: 57.75
Weight: 3.2lbs
Shock Cord Type: NW-15 15′ 3/8″ Nylon with sewn loops
Shock Cord Mount: SCM-3 Eyebolt
Fin Thickness: 1/8″
Ring Thickness: 1/4″
Motors:
F25 300'
G80 800'
H123 1700'
I-161 2800'
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
