LOC Precision Flying Model Rocket Kit 4.0" Yank Iris LOC YIRIS4
The 4" IRIS Kit includes our LOC in ring/fin system and a sleek 4:1 nose cone! A perfect choice for level 1 AND level 2 certifications in the same Rocket, simply add an electronics bay for dual deployment flights. The IRIS sports a 54mm motor mount and will accept a wide range of motors. Want to fly smaller? Adapt down easily and quickly with our LOC-N Ring adapters. This is certainly a do-it-all rocket!
IRIS4 Instructions
IRIS4 RocksimComplexity: Intermediate-Advanced
Diameter: 4″
Height: 77"
Weight: 5.5lbs.
Motor Mount: 54mm with LNR Compatibility
Parachute Size: 50″ Ripstop Nylon
Shock Cord Type: NW-20 20' 3/8″ Nylon with sewn loops
Shock Cord Mount: SCM-3 Eyebolt
Fin Thickness: 1/4″
Ring Thickness: 1/4″
Rail Buttons: 1010
Vinyl Decal: Logo only
Motors:
H100-6 950'
I-161-8 1650'
J-350-11 3400'
K-535-13 5500'
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue), Epoxy
Sandpaper
Masking Tape
Finishing Supplies like:
Sanding Sealer
Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
