LOC Precision Flying Model Rocket Kit 4" AMRAAM AIM-120C LOC LC-AIM120C4
The AIM-120C is a light weight, high power performer. The LOC-N-MOUNT 54mm is great for Level 1/2 motors if your field can handle it. This kit flies great on a variety of H to K motors. And the LOC-N-RING 29/38mm adaptors will bolt right up.
The AMRAAM features: 23″ Booster Section, 23" Booster Extension and 23" Payload, 2 couplers and a baffle system allowing the kit to be built a variety of ways. Add an optional 3.9" Electronics Bay for dual deployment flights!
DESCRIPTION
Complexity: Advanced
Diameter: 4.00″
Height: 81″
Weight: 4lb
Motor Mount: 54MM
Parachute Size: 50″ Ripstop Nylon
Shock Cord Type: 20′ Nylon
Shock Cord Mount: Eye Bolt / Baffle
Fin Thickness: 1/4″
Ring Thickness: 1/4″
1010 Rail Guides
Instructions: No - LOC Custom kits allow you to build and bash. Visit our How-To page for tips and tricks
Vinyl Decal: Yes
Recommended Engines:
54mm:
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
PRO for High Power Flyers
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
