LOC Precision Flying Model Rocket Kit 2.26" Nike Zeus LOC YZEUS22
A great flyer for E-G motor range. The 2.2″ Zeus weighs in at 17oz and comes with a 29mm motor mount standard. Triple slotted tubes so every fin has a tab! 24″ Parachute, tubular nylon shock cord with sewn loops, Kevlar mount, and fire blanket are all included
Complexity: 29mm Intermediate
Diameter: 2.26″
Height: 39.5″
Weight: 18oz
Motor Mount: 29MM
Shock Cord Type: 9′ 3/16″ Tubular Nylon
Shock Cord Mount: SCM-1 Kevlar
Fin Thickness: 1/8″
Ring Thickness: 1/8″
Instructions
Vinyl Decal
Polyethylene Enhanced Nose Cone
Rip Stop Nylon Parachute Recovery 24"
Recovery Blanket
Payload Section with Electronics Bay
2.26" Slotted Airframe
Laser Cut Rings and Fins
Rail Guides and Launch Lug
Vinyl Decal
Estimated 17oz
Made in the USA
Motors:
E16 400'
F25 1200'
G40 1320'
H55 2400'
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
