null
Estes Flying Model Rocket Kit Pro Ventris  EST 9701

Estes Flying Model Rocket Kit Pro Ventris EST 9701

(No reviews yet) Write a Review
$89.99
SKU:
EST 9701
Availability:
Ships same or next day
Shipping:
Calculated at Checkout
Skill Level:
Pro
Motor Mount Size:
29mm

Estes Flying Model Rocket Kit Pro Ventris  EST 9701

Boasting a bold, eye-catching design and powerful performance for its skill level, no collection is complete without this special bring back from the Estes model rocket family. The Ventris can reach staggering heights of up to 800 feet with Estes standard F15-4 model rocket engines and is equipped with laser-cut wooden fins for increased efficiency in the air. The Ventris makes its return only for a limited time, so get yours today!

Estes Pro Series II™ products are bigger and better than ever, giving you all the power you need to reach towering heights! Experience the awesome power of rockets that fly on our 29 mm engines!

When it's time to launch, you'll need an Estes Pro Series II™ Launch Pad and Pro Series II™ Launch Controller, as well as Estes model rocket engines, starters, and recovery wadding. Ensure you have six, ‘C’ size alkaline batteries for the launch controller secured, then you'll be prepared to launch!

  • SKILL LEVEL: The Ventris is an Intermediate level rocket that will help a budding rocketeer develop some basic model building and finishing skills.
  • RECOMMENDED ENGINES: F15-4
  • PROJECTED ALTITUDE: 800 ft (243.84 m) on a F15-4
  • RECOVERY SYSTEM: 24 in (60 cm) Nylon parachute

 

Recommended Engines: F15-4, F27-4R
Projected  Altitude: 880'(268.2m) on motor F15-6

Recovery System is 24"(60.96cm) Parachute

Length: 46.25"(117.5cm)

Diameter 2.5"(6.4cm)

Weight: 15.6oz(442.3g)

Fin Material is Laser Cut Balsa Wood

Needed to Build (sold separately)
Scissors, Pencil, Ruler, Fine Sandpaper, Carpenters Glue, Epoxy, Modeling Knife, Masking Tape, Paint & Primer

Download Instructions

Skill Level Pro Master

 

Model Rocket Kits are rated by Skill Level

1 Beginner

2 Intermediate

3 Advanced

4 Expert

5 Master

Pro - High and Medium Power

If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife

Ruler

Wood Glue, Model Cement or CA(Super Glue)

Sandpaper

Masking Tape

Finishing Supplies like:

Wood Filler

Sealer/Primer

Paint

Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code

 

Full one year warranty through manufacturer