- Rocketarium Rocket Kits
- Skill Level 2
- Rocketarium Flying Model Rocket Kit Cerberus Cluster RK-1002
Rocketarium Cerberus Cluster Rocket
Enjoy the fun and excitement of clustering, combined with a stylish split-fin design. Unleash the raw power of this flying model rocket with a cluster of three A to C motors. Push the launch button and watch it soar! Put the power of three to work for you and buy one today. The Cerberus stands nearly 3 feet tall. This rocket kit includes large self-adhesive decals and parachute kit for recovery. The included decals show the Cerberus logo. The three bands below the nose cone were painted. No engine hooks are provided with this kit, as there's no room for them. The motors are friction-fit.
Overall length : Nearly 3ft (35.68")
Diameter : 1.637" (BT60)
Forward Fin Span : 5.13"
Weight : 3.6oz
Estes® 3xA8-3, 3xB4-4, 3xC6-5
Challenges: While the motor mount assembly is different than non-cluster rocket kits, it is quite easy to build. The Cerberus kit remains at Skill Level 2, the fins are pre-cut. The Cerberus model rocket kit is complete with translucent plastic nose cone, balsa fin stock, fin templates, plywood rings, 15" plastic parachute kit.
Model Rocket Kits are rated by Skill Level
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Wood Glue, Model Cement or CA(Super Glue)
Finishing Supplies like:
Launching Equipment and Supplies like:
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code