Estes Flying Model Rocket Kit Multi-Roc EST 1329 Out of Production
The Estes Multi-Roc is a two stage rocket that also features a glider recovery! PLUS you can launch it IN 6 different configurations!
Hmmm, do you want to fly a single-stage, payloader, dual-stage, maybe even release a glider at apogee? The Multi-Roc is a booster rocket that lets you do it all! This parts-packed kit has everything you need to fly six different ways, and the all-balsa parasite glider is included too! Fly to 1200 feet as a multistage rocket, or stay closer to Earth with a single stage launch. Plug in the payload section, boost the glider to altitude, no rocket gives you so many options for high-flying fun!
Skill Level 4 Expert
Length: 25 in. (36.5 cm)
Diameter: 0.98 in. (25 mm)
Estimated Weight: 2.6 oz. (73.7 g)
Laser Cut Wood Fins
Waterslide Decals
Dual Streamer and Tumble Recovery
1/8" Launch Lug
Estimated Assembly Time 4 Hours (glue drying and painting time not included)
Recommended Engines: 3 Stage Launches--1st Stage: C11-0, D12-0. 2nd Stage: B6-0, C6-0. Rocket: B6-6, C6-7. 2 Stage Launches using 2nd and 3rd Stages--2nd Stage: C6-0. Rocket: B4-4, B6-4, C6-5. Rocket Only: B4-4, B6-4, C6-5.
Projected Max Altitude: 1200 ft. (366 m)
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
-
Multi-Roc
I have noticed that there isn't any line clip in the kit. Nor is there a base to the nose cone. These parts are essential for switching the payload section in and out.
