Public Missiles PML Flying Model Rocket Kit 4.0" Endeavour 54mm PML 39543
A unique and scale-like rocket featuring a split fin design similar to those found on the most advanced air-to-air missiles. The Endeavour flies great on H through J motors.
• Pre-slotted Quantum Tube airframe
• G-10 Fiberglass fins
• 50" Parachute
• Kevlar tether with sewn loop
• 18" Payload Bay
• 54mm Motor Mount
• Plastic nose cone
• RB-1000 Rail Guides
• Decal
PML General Kit Instructions
Specifications:
Diameter: 3.9" | Height: 71" | MMT: 54
Parachute: 50" | Payload: 18"
Fin Array: 3 (Split-fin) | Fin Thickness: 0.06"
The ENDEAVOUR is a huge and very cool looking kit for Level 1 and 2 flights. This rocket stands 71" tall, is 3.9" in diameter and has a 3 (Split-fin) fin design. This rocket comes standard with a 54mm motor mount and can fly on H thru J motors. At ~68 oz., the 50" parachute is sized right for the stock kit to make a safe landing under most field conditions. This kit comes standard with 10 series rail guides for use with 80/20 brand launch rails.
Skill Level Pro
Quantum Airframes:
The Quantum Tube (QT), is made from a special blended polymer that is extremely durable and easy to use. You will find this new material easy to work with and very forgiving. Most hobby type epoxies and paints will readily adhere to this material as well. The Quantum Tube can be squeezed, dropped, or even thrown and will not suffer any damage as can sometimes occur to cardboard or phenolic tube. The Quantum Tubes are molded in medium gray and have a glass smooth finish. The Quantum Tube does have one thing missing, the spiral groove! You will appreciate the fact that you no longer have to fill and sand the airframes to achieve the perfect finish.
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
PRO - High Power Pro
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
