Categories

Categories

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
eRockets

Categories

Categories

Rocketarium Flying Model Rocket Kit Daedalus Two Stage RK-1103

$28.99 $26.09
(You save $2.90)

Rocketarium Flying Model Rocket Kit Daedalus Two Stage RK-1103

$28.99 $26.09
(You save $2.90)
SKU:
ROC-RK-1103
Availability:
Ships same or next day
Shipping:
Calculated at checkout
Current Stock:
1
Share

Product Description

Rocketarium Daedalus Two-Stage Rocket

This is the command-center for the infamous project Minos. Daedalus has been orbiting the sun from a safe distance for some time, acquiring massive amounts of radiation data. It's mission is to safely guide the Icarus ships to the sun's surface for final approach. The Daedalus' two-stage design catapulted it into orbit quickly, well ahead of the Icarus science vessels. It took two E impulse class rocket motors to get the job done.

As a two-stage model rocket kit, the Daedalus has both a booster and sustainer stage to be built. These stages must fit correctly to ensure smooth staging. There are two stages to be assembled, which make this a Skill Level 2 kit.

Length: 38.75" (98 cm) 

Parts

Some of the parts included with this model rocket kit are : self-adhesive decals, laser-cut fins and plywood centering rings, translucent nose cone, 15" plastic parachute kit.


Skill Level: 
2
Length: 41.75" (106 cm) 
Diameter: 1.64 in. (76 mm) 
Estimated Weight: 3.9 oz. (115 g) 

Booster: D12-0, E12-0
Sustainer (Apogee): D12-5 (1360 ft), E9-6 (1900 ft), E12-6 (1850 ft) 

 

Requires:

Motor, Igniter and Wadding

Basic Launch System

Maxi Launch Rod

Carpenter's glue

Fine Sand Paper

Utility or Hobby Knife

Masking Tape

Primer (optional) & Paint

 
 

Model Rocket Kits are rated by Skill Level

1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
 
What is needed to build and fly
All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
 
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html

Product Reviews