Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...



Estes Flying Model Rocket Launch Set Rocket Science with Motors 5302 ** <Required to Pay for Parcel Select Shipping>

$34.99 $32.99
(You save $2.00)

Estes Flying Model Rocket Launch Set Rocket Science with Motors 5302 ** <Required to Pay for Parcel Select Shipping>

$34.99 $32.99
(You save $2.00)
EST 5302
Ships same or next day
Calculated at checkout
Current Stock:

Product Description

Estes Flying Model Rocket Launch Set Rocket Science with Motors  5302  <Parcel Select Ground Shipping Required>

Discover how you can have FUN with STEM (Science, Technology, Engineering and Math)! Build the “Rocket Science” model rocket, launch with one of the three engines included and observe as a reaction occurs to make this rocket soar! You will get to be a “Rocket Scientist” as you experiment with the other two included engines to see how high your rocket will go! Powered by Estes standard model rocket engines (also sold separately) this rocket can soar up to 1100 feet. We’ve also included a simple to build altitude tracker to help you measure how high your rocket goes and can be used again and again!


1 Rockets (requires White or yellow glue and clear tape)

1 Launch Pad

1 Launch Controller(requires 4 AA Batteries)

1 Altitude Tracker (requires a penny to use as weight)

3 Model Rocket Engines(A8-3, B6-4, C6-5), 4 Starters, 8 plugs, and recovery wadding


Skill Level 1 - Easy to Assemble

Length: 14 in. (35.7 cm)
Diameter: 0.98 in. (25 mm)
Estimated Weight: 1.4 oz. (39.7 g)

12 in. (30.5 cm) Parachute Recovery

Recommended Engines: B4-2 (First Flight), B6-2, B6-4, C6-3, C6-5

Projected Max Altitude: 1,100 ft. (335 m)


Model Rocket Kits are rated by Skill Level

E2X Easy to Assemble
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Wood Glue, Model Cement or CA(Super Glue)
Masking Tape
Finishing Supplies like:
Wood Filler
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code

Warranty Information

Other Details

Product Reviews