Estes Display Model Rocket Kit Phantom EST 1207
What better way to present the inner workings of a rocket and to help explain how rockets work than the Phantom Display Model Rocket Kit.
Made with clear plastic parts, and only requiring 15 minutes of time and a bit of glue to assemble, the Phantom will easily become your go-to rocket for classroom rocket experiments, demonstrations and displays. For display only. Not a flying model.
Assembly Required Skill Level 1 Beginner
Length 12.10 in.
Diameter 0.98 in.
Estimated Weight 1.30 oz
Assembly Time 1 Hour (glue drying time not included)
Fin Material is Clear Plastic
Recommended Engines Included cutaway engine only
Non-flying model
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Paint
