Public Missiles PML Flying Model Rocket Kit 2.6" 1/6 Scale Patriot  PML 1/6PATRIOT  Special Order

Public Missiles PML Flying Model Rocket Kit 2.6" 1/6 Scale Patriot PML 1/6PATRIOT Special Order

(No reviews yet) Write a Review
PML 1/6Patriot
Ships same or next day
Calculated at Checkout
Skill Level:
Motor Mount Size:

Sorry, Out of Stock

Public Missiles PML Flying Model Rocket Kit 2.5" 1/6 Scale Patriot  PML 1/6PATRIOT  Special Order Only

1/6 Semi-Scale of the Patriot Missile!

37" tall

2.5" Diameter

38mm Motor Mount, or 29mm motors using a motor adapter

Speeds of 0.85 Mach are possible

Rail Buttons

Motor Retention Clips, upgrade is recommended

Pre-slotted Quantum Tube airframe

G-10 fiberglass fins 0.06" Thick

30" Nylon Parachute


Painting and Detailing Sheet

Weight: 24oz

Certification Level: Pre or Level 1 

Motors: F thru H Motors

Center of pressure at 27.25"

Skill Level Pro

Click here for the kit instructions


Quantum Airframes:


The Quantum Tube (QT), is made from a special blended polymer that is extremely durable and easy to use. You will find this new material easy to work with and very forgiving. Most hobby type epoxies and paints will readily adhere to this material as well. The Quantum Tube can be squeezed, dropped, or even thrown and will not suffer any damage as can sometimes occur to cardboard or phenolic tube. The Quantum Tubes are molded in medium gray and have a glass smooth finish. The Quantum Tube does have one thing missing, the spiral groove! You will appreciate the fact that you no longer have to fill and sand the airframes to achieve the perfect finish.


Recommended Reload Motors:

H180W (3560' with 12 Second Delay)

G64W (2000' with 9 Second Delay)

F20-4 (710' with 4 Second Delay)


Model Rocket Kits are rated by Skill Level

1 Beginner

2 Intermediate

3 Advanced

4 Expert

5 Master

Pro - High Power Rockets

If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:


Hobby Knife


Wood Glue, Model Cement or CA(Super Glue)


Masking Tape

Finishing Supplies like:

Wood Filler



Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at The NAR Website