LOC Precision Flying Model Rocket Kit Cool Spool LOC PC-CoolSpool
COOL SPOOL KIT – This Blast from the Past is a limited edition KIT FORM of the original Cool Spool first sold in 2006. All the parts and pieces to make your own Cool Spool packaged in kit form. Requires plastic glue (Testers or similar), wood glue and a little time to dry. The first batch also includes the AeroTech motor clip to make flying F and G single use easy. Comes with parachute and decals.
Assembly Required Skill Level Pro
Specifications:
Length: 6"
Body Tube Diameter: 1.635"
Spool Diameter: 6.5"
Weight: 10.9oz
Parachute Recovery
Recommended Engines:
18mm
A8-3, B6-4, C6-5
Maximum apogee 2000'
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
Pro Higher Power Motors
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
