LOC Precision Flying Model Rocket Kit 3.1" Magnum Cluster LOC MAG32
One of the performance series kits. The 3″ Magnum Rocket with 3x29mm motor mounts is made for clustered flights! From 3-E-16’s to 3-H55s! 500-5,000′ altitudes are possible. This kit includes an optional baffle system, or replace with an electronics bay for dual deployment flights. Nylon shock cord with loops sewn in. 36″ parachute and all necessary hardware! A fantastic choice for entry level clustered flights.
Polyethylene Enhanced Nose Cone
Nylon Parachute Recovery
Recovery Fire Blanket
3.1" Slotted Airframe
3 X 29mm Motor Mounts
Laser Cut Rings and Fins
Made in the USA
Assembly Required Skill Level Pro Intermediate-Advanced
Diameter: 3.1″
Height: 42.5
Weight: 22oz
Motor Mount: 3x29mm
Parachute Size: 36″ Ripstop Nylon
Shock Cord Type: NW-15 15′ 3/8″ Nylon with sewn loops
Shock Cord Mount: Baffle
Fin Thickness: 1/8″
Ring Thickness: 1/8″
Starter Fire Blanket
Vinyl Decals
Instructions
Motors:
3 x E16-7 900'
3 X F20-10 2100'
3 X G40-10 3100'
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code