LOC Precision Flying Model Rocket Kit 3.1" Deployer LOC TML-DEPLOYER3
Polyethylene Enhanced Nose Cone
28" Nylon Parachute Recovery, Streamer Drogue
3.1" Slotted Airframe
29mm Motor Mount
Laser Cut Rings and Fins 1/8" Plywood
Electronics Bay with Supporting Hardware for Dual Deployment
Payload Bay
Sewn Ends Nylon Shock Cords
Rail Guides
Vinyl Decal
Instructions
Made in the USA
Assembly Required, Skill Level Pro
Complexity: Intermediate-Advanced
Diameter: 3.1″
Length: 43.5
Weight: 2.3lbs.
Motors:
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
