LOC Precision Flying Model Rocket Kit 2.56" Hawk 29mm LOC TWT-HAWK
2.6" variation of the HAWK missile. Sporting our Modular Motor Can for the widest variety of motor configurations. Stock with 29mm MMC it can easily be switched out for any of the the available combinations! Using removable rivets you can switch out the configuration at any time! AND the cans are cross compatible with any other 2.6" MMC style kits! Multi-slotted airframe and fins for more surface area to secure the fins to the airframe!
Polyethylene Enhanced Nose Cone
Motor Mount Change(MMC) Compatible
Preslotted Airframe
Laser Cut Fins and Rings
Vinyl Decals
12' x 3/16" Tubular Nylon Shock Cord
Fire Protection Blanket
Recovery Swivel
Skill Level: 3
Specifications:
Length: 34"(86.4cm)
Diameter: 2.56"(6.5cm)
Weight: 36oz
Rip Stop Nylon 36" Parachute
Made in the USA
Recommended Engines:
29mm
E30-5 450"
F27-4 550"
F67-5 850"
G74-7 1200"
Instructions
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
