Estes Flying Model Rocket Kit Indicator EST 7244 Out of Production
A simple build and mini engine powered! Give us about an afternoon of your time and we will give you a fun rocket build! Standing over 21 inches tall, watch the Indicator reach 200 feet on an A10-3T engine!
Skill Level 2 Intermediate
Length: 21.2"(53.8cm)
Diameter: 0.74"(19mm) top/ 0.98"(25mm) bottom
Estimated Weight: 1.3oz(36.9g)
Laser cut wood fins
waterslide decals
9"(22.9cm) parachute recovery
1/8" Launch Lug
Estimated Assembly Time 2 Hours (painting and glue drying time not included) Download Instructions
Projected Max Altitude - 200'(69m)
Recommended Engines: A3-4T (First Flight), A10-3T
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
