Categories

Categories

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
eRockets

Categories

Categories

Rocketarium Flying Model Rocket Kit Frangible Arcas RK-1105

$26.99 $24.29
(You save $2.70)

Rocketarium Flying Model Rocket Kit Frangible Arcas RK-1105

$26.99 $24.29
(You save $2.70)
SKU:
ROC-RK-FRNGB
Availability:
Ships same or next day
Shipping:
Calculated at checkout
Current Stock:
1
Share

Product Description

Rocketarium Frangible ARCAS Rocket

During the 1960's, the Frangible ARCAS was developed as a rocket that could be flown over residential areas.  To avoid damage to property, or injury, upon landing, the rocket was destroyed in mid-air. It has a sheet of explosive material wrapped around the airframe.  Once the explosive was triggered, the rocket was reduced to particle sizes with acceptable levels of kinetic impact energy.  
 
The scale Frangible ARCAS model separates at motor ejection and descends under a parachute.  The kit doesn't get blown to pieces and can enjoy many flights, as opposed to the real deal.
 
Dimensions
Total length : just over 3 foot (36.5")
Diameter : 1.637" (BT60)
Fin Span : 4.647"
Weight : 4.4oz
Manufacturer Recommended Rocket Engines
Estes® D12-5
Single Use Aerotech® E20-7
Reloadable Aerotech® E18-7, E28-7, F24-7
Challenges:  The explosive sheet wrapped around the airframe is created by cutting two short tube sections and gluing them onto the airframe.  The transition from the airframe to the cut tubes if formed by the modeler with spot filler.  Self-adhesive decals are included for all lettering shown.
 

Model Rocket Kits are rated by Skill Level

1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
 
What is needed to build and fly
All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
 
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html

Other Details

Product Reviews