null
Rocketarium Flying Model Rocket Kit Black Brant VA, B Scale Canadian Sounding Rocket  ROC-RK-1041

Rocketarium Flying Model Rocket Kit Black Brant VA, B Scale Canadian Sounding Rocket ROC-RK-1041

(No reviews yet) Write a Review
Now: $39.99
Was: $41.99
SKU:
ROC-RK-1041
UPC:
UPC628250034417
Condition:
New
Availability:
Ships same or next day
Shipping:
Calculated at Checkout
Skill Level:
1 Beginner
Motor Mount Size:
24mm

Rocketarium Flying Model Rocket Kit Black Brant VA, B Scale Canadian Sounding Rocket  ROC-RK-1041

Skill Level: 1

Uses D, E, F Estes and Aerotech Motors
20 Laser Cut Parts
Plastic nose cone
Vinyl and water-slide decals for both VA and VB version included
Ejection Baffle (no wadding required)
18" Plastic Pre-Assembled Parachute
Over 31" Tall
Requires 3/16" Launch Rod
Intermediate Assembly Skills Required
Recommended Engines:
D12-5, E12-6
E20-7, E30-7, F44-8
E18-7, E28-7, F24-7
Specifications
Length: 31.91" (81 cm)
Diameter: 1.72" (43.7 mm)
Weight: 4.62 oz. (131 g)
Motor Mount: 24 mm.
Recovery System: 18" Plastic Parachute, Ejection Baffle
Projected Max Altitude: 1740 ft. (530 m)
Description
Standing over 2 1/2 feet tall, the Rocketarium Black Brant V is a large flying model rocket capable of altitudes in excess of 1700 feet on an F motor before returning back to Earth so it can be flown over and over again. Unlike most model rockets, the Black Brant V contains an ejection baffle system which means that no recovery wadding is required for flight. Waterslide decals for both VA and VB version included.

Challenges
Fins and supports need to be tapered

 

Model Rocket Kits are rated by Skill Level

1 Beginner

2 Intermediate

3 Advanced

4 Expert

5 Master

If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife

Ruler

Wood Glue, Model Cement or CA(Super Glue)

Sandpaper

Masking Tape

Finishing Supplies like:

Wood Filler

Sealer/Primer

Paint

Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code