Public Missiles PML Flying Model Rocket Kit2.1" X-Calibur  PML 21385

Diameter: 2.1"
Height: 46"
Weight: 32 oz.
MMT: 38mm
Chute: 30"
PayLoad: 12"
G10 Fin Thickness: 0.06"
CertLevel: Pre-Cert & Level 1
Motors: G thru I

Six fins, a large payload section, and PML`s standard G10 fins, QT airframe, and great quality make this a bird you`re sure to enjoy.

Another of our kits that can fly on lower-power motors, the PML X-Calibur! Comes standard with a 38mm motor mount, but can easily fly with 29mm motors using the motor retainer HAMR- 38-SET and the HAMR-38/29-ADPTR. Fly it low and slow on a G motor, or put in an I and watch the X-Calibur "disappear"!
.
• Pre-slotted Quantum Tube airframe
• 12" payload section
• Dura-Chute nylon parachute
• Plastic nosecone
• 38mm motor mount
• Piston ejection system
• G-10 fins
• Linear Rail Lugs for 10/10 launch rails

Skill Level 5

Instructions

Model Rocket Kits are rated by Skill Level

1 Beginner

2 Intermediate

3 Advanced

4 Expert

5 Master

If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife

Ruler

Wood Glue, Model Cement or CA(Super Glue)

Sandpaper

Masking Tape

Finishing Supplies like:

Wood Filler

Sealer/Primer

Paint

Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html