null
Public Missiles PML Flying Model Rocket Kit 3.9" Striker  PML 39382

Public Missiles PML Flying Model Rocket Kit 3.9" Striker PML 39382

(No reviews yet) Write a Review
$174.99
SKU:
PML 39382
Availability:
Ships same or next day
Shipping:
Calculated at Checkout
Skill Level:
HP-5
Motor Mount Size:
38mm

Public Missiles PML Flying Model Rocket Kit 3.9" Striker  PML 39382

Striker is similar in styling to some of the most advanced and devastating weapons on the modern battlefield. It'll sure to be a stunner at any launch!

Striker utilizes our new Stuffer Tube Recovery design. Striker comes with a 38mm motor mount and Linear Rail Lugs as standard equipment.

Instructions

Striker Nose Cone Build Instructions

Striker Rocksim

Pre-slotted phenolic airframe

Plastic nosecone

Kevlar tether with sewn loop

G-10 fins 0.063" thickness

Rail guides for 10/10 launch rails

Decal

Height: 36.5"

Weight: 52oz

38mm Motor Mount

36" Nylon Parachute

10/10 Rail Buttons

Certification Level: Level 1 and/or 2 Required to Fly

Motors: H thru J  Motor Recommendations

Recommended Motors: 

G80-7T 1150'

H182-10 2110'

H170-10  2850'

I-140-12  3050'

Skill Level Pro

Recommended Upgrade: Aero Pack Retainer RA38L

Optional Adapter from 38mm to 29mm Motors A2938

 

Quantum Airframes:

The Quantum Tube (QT), is made from a special blended polymer that is extremely durable and easy to use. You will find this new material easy to work with and very forgiving. Most hobby type epoxies and paints will readily adhere to this material as well. The Quantum Tube can be squeezed, dropped, or even thrown and will not suffer any damage as can sometimes occur to cardboard or phenolic tube. The Quantum Tubes are molded in medium gray and have a glass smooth finish. The Quantum Tube does have one thing missing, the spiral groove! You will appreciate the fact that you no longer have to fill and sand the airframes to achieve the perfect finish. All PML rocket kits 2.1" dia. through 3.9" dia. come standard with Quantum Tube airframes.

 

Model Rocket Kits are rated by Skill Level

1 Beginner

2 Intermediate

3 Advanced

4 Expert

5 Master

Pro - High Power Kits

If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife

Ruler

Wood Glue, Model Cement or CA(Super Glue)

Sandpaper

Masking Tape

Finishing Supplies like:

Wood Filler

Sealer/Primer

Paint

Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at The NAR Website