Categories
Categories
Brands
Brands
- Home
- Public Missiles(PML) High Power Rocket Kits
- Public Missiles PML Flying Model Rocket Kit 3.9" Bumble Bee PML 39383
- Home
- Skill Level
- PRO
- Public Missiles PML Flying Model Rocket Kit 3.9" Bumble Bee PML 39383
Public Missiles PML Flying Model Rocket Kit 3.9" Bumble Bee PML 39383
Public Missiles PML Flying Model Rocket Kit 3.9" Bumble Bee PML 39383
Product Description
Public Missiles PML Flying Model Rocket Kit 3.9" Bumble Bee PML 39383
Bumble Bee is short and sweet yet nice and stable. Not an inch of space is wasted inside of this rocket! Bumble Bee utilizes our new Stuffer Tube Recovery design. Much of the recovery system is inside of the nosecone! The shock cord is "built into" the nosecone and can never tear out. Bumble Bee comes with a 38mm motor mount standard.
Comes complete with our LRL-10 Linear Rail Lugs (for standard 10/10 rails).
Can be flown on many H, I, and even some J motors! To use 29mm motors in a 38mm mount, purchase the optional Adapter
Pre-slotted Quantum Tube airframe
G-10 fiberglass fins
Piston ejection system
Multi-panel nylon parachute 48"
Plastic nosecone
Detailed decal sheet included
Diameter: 3.9"
Height: 35.5"
MMT: 38mm
Weight: 44 oz.
Chute: 48"
Payload: None
G10 Fin Thickness: 0.06"
CertLevel: Cert Level 1
Motors: H and I
Center of Pressure: 24.8"
Motors:
Single Use(29mm): G80T, H55W
Re-loads(29mm): G75J, H97J, H128W, H180W, H220T, H238T, I200W
Re-loads(38mm): H73J, H112J, H123W, H148R, H242T, I154J, I161W, I195J, I211W
Note: Use of H & I motors require certification and an FAA Waiver to fly.
Recommended Motors:
G80T (1207ft in 6.75sec)
H55W (1547ft in 6.93sec)
Skill Level 5
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at The NAR Website