null

Categories

Categories

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
eRockets

Categories

Categories

Public Missiles PML Flying Model Rocket Kit 3.9" Bumble Bee PML 39383

$131.99 $129.99
(You save $2.00)

Public Missiles PML Flying Model Rocket Kit 3.9" Bumble Bee PML 39383

$131.99 $129.99
(You save $2.00)
SKU:
PML 39383
Availability:
Ships same or next day
Shipping:
Calculated at checkout
Current Stock:
1
Share

Product Description

Public Missiles PML Flying Model Rocket Kit 3.9" Bumble Bee  PML 39383 

Bumble Bee is short and sweet yet nice and stable. Not an inch of space is wasted inside of this rocket! Bumble Bee utilizes our new Stuffer Tube Recovery design. Much of the recovery system is inside of the nosecone! The shock cord is "built into" the nosecone and can never tear out. Bumble Bee comes with a 38mm motor mount standard.

Comes complete with our LRL-10 Linear Rail Lugs (for standard 10/10 rails).

Can be flown on many H, I, and even some J motors! To use 29mm motors in a 38mm mount, purchase the optional Adapter

Instructions

Pre-slotted Quantum Tube airframe

G-10 fiberglass fins

Piston ejection system

Multi-panel nylon parachute 48"

Plastic nosecone

Detailed decal sheet included

Diameter: 3.9"
Height: 35.5"
MMT: 38mm
Weight: 44 oz.
Chute: 48"
Payload: None
G10 Fin Thickness: 0.06"
CertLevel: Cert Level 1
Motors: H and I

Center of Pressure: 24.8"

Motors:

Single Use(29mm): G80T, H55W

Re-loads(29mm):  G75J,  H97J, H128W, H180W, H220T, H238T, I200W

Re-loads(38mm):  H73J, H112J, H123W, H148R, H242T, I154J, I161W, I195J, I211W

Note: Use of H & I motors require certification and an FAA Waiver to fly.

Recommended Motors: 

G80T (1207ft in 6.75sec)

H55W (1547ft in 6.93sec)

Skill Level 5

 

Model Rocket Kits are rated by Skill Level

1 Beginner

2 Intermediate

3 Advanced

4 Expert

5 Master

If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife

Ruler

Wood Glue, Model Cement or CA(Super Glue)

Sandpaper

Masking Tape

Finishing Supplies like:

Wood Filler

Sealer/Primer

Paint

Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at The NAR Website

Other Details

Product Reviews