Public Missiles PML Flying Model Rocket Kit 2.5" Explorer PML 25382

This four-foot sport flier is easy to build and fun to fly. Another perfect Level 1 certification kit! Uses PML`s 2.5 inch pre-slotted Quantum Tube airframe and G-10 fiberglass fins. Soars to thousands of feet with F through I motors.  29mm motor adapters are available separately

• Pre-slotted Quantum Tube airframe
• Dura-Chute nylon parachute
• Plastic nosecone
• 38mm motor mount
• Piston ejection system
• G-10 fins
• Linear Rail Lugs for 10/10 launch rails

Diameter: 2.5"
Height: 48"
Weight: 32 oz.
MMT: 38mm
Chute: 30"
PayLoad: None
G0 Fin Thickness: 0.06"
CertLevel: Pre-Cert & Level 1
Motors: F thru I

Skill Level 5

Model Rocket Kits are rated by Skill Level

1 Beginner

2 Intermediate

3 Advanced

4 Expert

5 Master

If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife

Ruler

Wood Glue, Model Cement or CA(Super Glue)

Sandpaper

Masking Tape

Finishing Supplies like:

Wood Filler

Sealer/Primer

Paint

Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code