Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...



Public Missiles PML Flying Model Rocket Kit 2.1" Tiny Pterodactyl PML 21294

$69.99 $68.99
(You save $1.00)

Public Missiles PML Flying Model Rocket Kit 2.1" Tiny Pterodactyl PML 21294

$69.99 $68.99
(You save $1.00)
PML 21294
Ships same or next day
Calculated at checkout
Current Stock:

Product Description

Public Missiles PML Flying Model Rocket Kit 2.1" Tiny Pterodactyl  PML 21294

A new generation of Pterodactyls is born!
Like it’s parent the mighty Pterodactyl and sibling Pterodactyl Jr., the Tiny Pterodactyl was born to fly.

Use an F motor for slow, graceful flights or pack it with a G motor for real excitement. We’ve even flown the Tiny Pterodactyl on an H-238 and amazed the crowd with a neck snapping transonic flight!*
* Nose weight was added to keep the CG forward of the CP during this flight. Some rocketeers like to keep two nosecones on hand: one weighted for higher power motors and a standard one for lower power flights.
• Pre-slotted Quantum Tube airframe
• Dura-Chute nylon parachute
• Plastic nosecone
• 29mm motor mount
• Piston ejection system
• G-10 fins
• Linear Rail Lugs for 10/10 launch rails

Diameter: 2.1"
Height: 25.5"
Weight: 18 oz.
MMT: 29mm
Chute: 18"
PayLoad: None
G10 Fin Thickness: 0.06"
Cert Level: Pre-Cert & Level 1
Motors: F thru H

F20-7 1300'

F23-7 1030'

F67-6 1400'

G64-7W 2600'

H128-12 3800'

Skill Level 5 Pro

Pterodactyl Instructions


Model Rocket Kits are rated by Skill Level

1 Beginner

2 Intermediate

3 Advanced

4 Expert

5 Master

If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife


Wood Glue, Model Cement or CA(Super Glue)


Masking Tape

Finishing Supplies like:

Wood Filler



Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code

Other Details

Product Reviews