null

Categories

Categories

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
eRockets

Categories

Categories

Public Missiles PML Flying Model Rocket Kit 1.5" Cirrus PML 15381

$69.99

Public Missiles PML Flying Model Rocket Kit 1.5" Cirrus PML 15381

$69.99
SKU:
PML 15381
Availability:
Ships same or next day
Shipping:
Calculated at checkout
Current Stock:
1
Share

Product Description

Public Missiles PML Flying Model Rocket Kit 1.5" Cirrus  PML 15381

The Cirrus Dart is a specialized super-high-performance kit and should only be used by experienced high power fliers.
This high velocity, 38mm minimum diameter dart is capable of extremely high altitudes with relatively small motors. Perfect for "H" and "I" class altitude attempts.
The Cirrus Dart is a specialized super-high-performance kit and should only be used by experienced high power fliers.
The Cirrus comes with...
Pre-slotted phenolic airframe
G-10 fiberglass fins
Pre-weighted solid nosecone
7.5" Payload Bay
Piston ejection system
Ultra-light nylon parachute
Pre-cut 6 oz fiberglass reinforcement cloth
Explicit instructions
| Don`t let its small size fool you, this is NOT a "model" rocket! In fact this rocket can attain higher altitudes than a 4 inch diameter rocket using a "K" motor; and at a small fraction of the cost. Think about it... If recording the highest altitude is your goal, why would you put a 2-ounce altimeter measuring 1.5" x 4" in a 20 pound behemoth to attain a lower altitude? See the Motor Specifications Chart in the Spec Sheet section of our website for performance information. This is not a "Skill Level 1" rocket kit. To keep a high velocity, minimum diameter rocket like this together during flight, several important construction steps must be strictly adhered to. But don`t worry, everything you need (except for adhesives and paint) is supplied with the kit. Very explicit, step-by-step instructions are supplied as well. 20 minute Finish Cure Epoxy (EPY-FINISHING) will be required in addition to your regular 5 minute epoxy (EPY-5MIN). A HAMR motor retainer is not recommended for the Cirrus kit as it will disturb the airflow by projecting beyond the sides of the airframe, negatively impacting the purpose of the Cirrus, low drag and high altitude.
Click here for the complete Data Sheet which includes features, specs, and a motor/altitude chart specific to this kit in a printable format.

Instructions

Diameter: 1.5"
Height: 44"
Weight: 18 oz.
MMT: 38mm (Minimum Diameter)
Chute: 18"
Payload: 7.5"
Fin Thickness: 0.06"
CertLevel: Pre-Cert & Level 1
Motors: F thur I

Skill Level 5

 

Model Rocket Kits are rated by Skill Level

1 Beginner

2 Intermediate

3 Advanced

4 Expert

5 Master

If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife

Ruler

Wood Glue, Model Cement or CA(Super Glue)

Sandpaper

Masking Tape

Finishing Supplies like:

Wood Filler

Sealer/Primer

Paint

Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

Launch Controller

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html

Other Details

Product Reviews

Find Similar Products by Category