Categories

Categories

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
eRockets

Categories

Categories

North Coast Rocketry Flying Model Rocket Kit North Hawk NCR 206

$49.99

North Coast Rocketry Flying Model Rocket Kit North Hawk NCR 206

$49.99
SKU:
NCR 206
Availability:
Ships same or next day
Shipping:
Calculated at checkout
Current Stock:
1
Share

Product Description

North Coast Rocketry Releases the North Hawk TM Flying Model Rocket Kit!

North Coast Rocketry is proud to release the North HawkTM, a radio control boost glider kit, designed to fly on B and C engines.

The NCR North Hawk takes advantage of revolution in micro radio control gear to bring affordable RC flying to model rocketry! The North Hawk, designed by Bob Ferrante, features straight up, hands-off boosts due to it’s long pop-pod. It then easily transitions to glide, while the pod returns to earth via streamer.

The North Hawk was designed with the novice RC flyer in mind. The kit takes advantage of the laser cutting process to make part alignment straightforward and assembly quick and easy.

The kit features laser-cut balsa parts, 3D printed pop-pod hooks, and a colorful decal. This kit requires a Spektrum AS6410L DSMX-6-Ch Ultra Micro AS3X Receiver; compatible transmitter; and 70 mAh 1S 14C LiPo battery.

Physical Data
Glider Length: 22" (56cm)
Glider Wingspan: 24" (61cm)
Glider Weight: 2.4oz (68g)
 
Motors:
B6-2  250ft (76m)
C6-3  500ft (152m)
 
 

Model Rocket Kits are rated by Skill Level

1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
 
What is needed to build and fly
All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit. 
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
 
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html

Product Videos

Other Details

Product Reviews

Find Similar Products by Category