NewWay Flying Model Rocket Kit Q-bee Square
Short but speedy, Q-bee will be the queen of your rocket fleet. And here’s where a square body tube really pays off - did you ever see a round model rocket with off-set fins?
Laser cut fins
Balsa nose cone
Kevlar shock cord
Parachute
Decal
1/8" Launch Lug
Recommended motors 13mm: A3-4T, A10-3T
Length 7.75”
Width 1.1”
Fin Span 4.0”
Weight 1.4oz
Skill Level 1
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code that can be found at http://www.nar.org/NARmrsc.html
